in this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite element method. first, the numerical results were validated by the results of experimental test performed by an instron 8802 servo hydraulic machine. also, the effect of cutout angle (θ), cutout size, cutout position (l0/l) and cutout aspect ratios (b/a...

With dynamic loading like landing impact a distinction should be made between relatively short and long, quasistatic loading durations, and loadings the durations of which are in the order of the longest lateral period (lowest eigenfrequency) of the structure. A particular problem is to be expected under the later loadings where the interaction of loading dynamics with the dynamics of the buckl...

this paper deals with local buckling analysis of rectangular functionally graded material plates using finite strip method and based on classical plate theory. the modulus of elasticity of the plate is assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. the principle of minimum total potential energy is employed to obtain stiffness and sta...

This paper investigates the buckling of finite isotropic rectangular plates with circular cutout under uniaxial and biaxial loading. The complex potential method is used to calculate the pre-buckling stress distribution around the cutout in the plate with finite dimensions. To satisfy the in-plane boundary conditions, the generalized complex-potential functions are introduced and a new method b...

In this paper the effects of circular and elliptical cutout on the buckling behavior of a sixteen ply quasi-isotropic graphite/epoxy symmetrically laminated rectangular composite plate [0°/+45°/45°/90°]2s, subjected to various linearly varying in-plane compressive loads, numerically. Further, this paper addresses the effects of size of elliptical cutout, orientation of elliptical cutout, plate ...

This paper introduces a very simple way to evaluate low stress shearing properties of woven fabrics with the advantages of simplicity and easy accessibility. A 200-gram load is applied on small portion of the sample instead of applying the load overall width of the fabric. As a result, buckling of the fabric will happen and the loading-unloading curve will show the behavior of the fabric during...

An experimental and analytical research on shear buckling of a comparably large polymer composite I-section is presented. It is known that shear buckling load of a large span composite beam is difficult to determine experimentally. In order to sensitively detect shear buckling of the tested I-section, twenty strain rosettes and eight displacement sensors were applied and attached on the web and...

The problem of the out of plane buckling of polar orthotropic armuli under uniform internal or external pressure loading has been investigated with the assumption of axisymmetry by numerous researchers. In this paper, the buckling of polar and rectilinearly orthotropic annuli subjected to internal or external pressure loading is examined without restriction to axisymmetric buckling modes. The b...

Stochastic amorphous Pd43Ni10Cu27P20 foams were tested in quasistatic and dynamic loading. The strength/porosity relations show distinct slopes for the two loading conditions, suggesting a strain-rate-induced change in the foam yielding mechanism. The strength/porosity correlation of the dynamic test data along with microscopy assessments support that dynamic foam yielding is dominated by plast...

design and construction of efficient and economic reinforced concrete (r.c.) hyperbolic cooling towers have driven the engineers toward the design of tall and thin-shell towers which have considerable high slenderness aspect ratio. consequently, the shell of r.c. cooling towers with relative high slenderness aspect ratio is extremely prone to buckling instability due to wind loading. to increas...